It is believed that the UK is the third-largest boiler market worldwide with around 1.7 millions of units sold. The country is home to over 26 million boilers in operation and the majority of them being gas condensing variety. Any boiler that has 70kW or over is considered to be commercial boiler.
The lifespan of commercial boilers is between 10 and 15 years. One common error of homeowners, however, is to get too comfortable in the presence of a working boiler and ignore the need to maintain it regularly.
The issue is that if small damage isn’t detected in the early stages, it can cause a larger issue that could impact the operation and put employees at risk. Regular commercial boiler maintenance can significantly lower the risk.
There are a variety of signs that a boiler requires being checked. In the first instance, there may be an issue with the boiler if your home is cold even though the boiler’s switch being on. If, after confirming the pipes and radiators are heating simultaneously and at similar temperatures, and it is discovered that they’re working well, then the issue most likely lies in the boiler.
The sound of any previously unheard or unknown noises are not to be overlooked. The unusual sounds of the sound of ticking, whirring, or clunking may be a sign of boiler issues.
Another sign of a boiler issue is the increase in fuel costs. A boiler that is inefficient will consume more fuel, which can result in companies with consistently rising costs for gas. Many business owners nevertheless, choose to change gas providers without considering possible boiler issue prior to doing so.
The significance of Boiler Service
If you’ve got a modern heating system within your commercial establishment or an old, reliable boiler that you are hoping will last another winter before it’s replaced the importance of regular maintenance can’t be undervalued.
Commercial boilers are an investment of a substantial amount, therefore it’s only normal to try to safeguard this expense by keeping your heating system regularly maintained. A commercial heating system that may have been able to shut down within a couple of months could remain operational for a few years longer if maintained by a qualified HVAC engineer.
Incorrectly maintained boilers could result in a risk for people and can be disruptive to the company. An approach that is proactive to maintenance of the system is beneficial in several ways. From a safety standpoint an unintentional boiler failure that results in gas leaks or inadequate ventilation could cause occupational health risks. Carbon monoxide poisoning causes approximately fifty deaths in UK every year.
Regular maintenance ensures that any problem even if it’s minor, can be identified and reported promptly. This is more effective than recognizing the issue too tardy or during times when heat is particularly needed i.e. in winter and the fall. When you stick to a schedule of maintenance in the fall and winter, all parts that require replacement or repair can be recognized. Preventive maintenance is less costly than paying for repairs that are reactive. A well-functioning boiler can also help you save money as it can reduce the amount of fuel wasted and reduce your monthly energy bill.
There are numerous laws and regulations with implications regarding boiler maintenance and servicing. For instance, under the law, landlords and businesses are required to provide tenants copies of their Building’s Gas Safety Certificate. Some of the rules you have know about are The Health & Safety at Work Act (1974), Workplace (Health, Safety & Welfare) Regulations 1992 as well as the Gas Safety (Installation and Use) Regulations 1998.
Frequency of Boiler Service
The most recommended frequency for commercial boiler maintenance is every year. Commercial boilers are more vulnerable for wear and tear because of their use in heavy-duty environments. In addition, the majority of insurance companies require that boilers be serviced at least every 12 months to preserve the warranty’s validity. The paperwork will be given following each service. This can be shown by the company should the need for repairs is required.
A property owner is accountable to monitor their HVAC equipment, which includes the boiler for commercial use. It must be monitored continuously through daily and weekly, monthly and semi-annual inspections that help identify the indicators of a malfunction or unsafe operating. If there is any issue the boiler should be serviced immediately. promptly scheduled to get the boiler repaired prior to the issue gets worse.
The inspections that the owner conducts are to be limited to basic observation and maintenance processes. Like we said it is important to be aware of variations in operation, like the appearance of strange noises or the system’s inability to heat in the same way it used to is a an integral part of the routine in-house inspections.
The more formal maintenance procedure should be done by an expert to avoid damaging the boiler. Professional HVAC technicians are equipped and skilled to carry out thorough inspections on UK boilers. They can provide you with a an extensive report on the safety of the boiler and any signs of wear and wear and tear.
It is the Annual Commercial Boiler Service
The service engineer will determine whether pipes, boilers and flue have been set up correctly. This includes both parts, both external and internal. Proper ventilation, the flame within the boiler, and indications of leaks or corrosion are also checked.
Commercial boilers will be also inspected for compliance with existing regulations that govern non-domestic facilities. This includes gas safety rules and water by-laws, building regulations, British and European standards and other similar regulations.
The boiler’s casing is taken off to allow an examination of each internal part. The parts that require special attention are:
Burner
Heat exchanger
Main injector
Spark probe
Electrical connections
Fans
Seals
The flow and pressure of the gas
Combustion and flue
Electrodes
Condensate traps and pipes
Safety devices
Then, the inside that of your boiler will be cleaned in order to eliminate any debris or obstructions.
The next step would be performing a test to verify that the boiler operates according to The Gas Safety (Installation and Use) Regulations 1998.
If any problems are identified, such as gas leaks, damaged parts or gas lines The engineer will note them and report them in the final report.
Once the process has been completed after the process is completed, the engineer will submit an exhaustive report on the procedure they conducted. Any significant problem will be noted particularly if it requires the repair of or replacement. Notification will also be given in the situation where the boiler is in violation of any building or gas safety rules.
The boiler service typically lasts about half an hour to be completed.
After everything is completed and the report is completed, it will be prepared for signing. The report should be reviewed to verify that all notes are correct. A duplicate of the report should be requested, as the majority of insurance companies require this report to validate the warranty.
Menu
Keep Your Licence